Proceedings

2014

  • Coppieters, S., Hakoyama, T., Yanaga, D., Lava, P. and Kuwabara, T. On stress measurement errors in biaxial tensile testing and the impact on yield surface identification
      Proc. NUMISHEET 2014, Melbourne, Australia, 6-10 January, 2014, pp.628-631. (AIP Conference Proceedings, Volume 1567)
  • Coppieters, S., Cooreman, S., Debruyne, D. and Kuwabara, T.Advances in post-necking flow curve identification of sheet metal through standard tensile testing
      Proc. NUMISHEET 2014, Melbourne, Australia, 6-10 January, 2014, pp.632-635. (AIP Conference Proceedings, Volume 1567)

2013

  • P. Lava, M. Rossi, M. Badaloni, D. Debruyne and F. Pierron Simulating the full material identification chain using heterogeneous test, digital image correlation and the virtual fields method
      TexComp-11 2013, September 19-20, Leuven, Belgium
  • M. Badaloni, P. Lava, M. Rossi, D. Debruyne and F. Pierron Experimental validation of a simulator for optimized material identification involving DIC and VFM
      9th International Conference on Advances in Experimental Mechanics 2013, September 3-5, Cardiff, UK
  • M. Rossi, M. Badaloni, P. Lava, D. Debruyne, G. Chiappini and M.Sasso Advanced Test Simulator to Reproduce Experiments at Small and Large Deformations
      Sem Annual 2013, June 3-5, Lombard, IL USA
  • M. Martinez , J. Bussieres , D. Debruyne and P. Lava Load Monitoring using a Rayleigh Backscattering Fibre Optic System
      ICAST 2013, July 9-12, Las Vegas, USA
  • P. Wang , F. Pierron , O-T Thomsen , M. Rossi , P. Lava Optimized experimental characterization of pvc foam using DIC test and the virtual fields method
      ICCM 19, July 28 - August 2, Montreal, Canada
  • P. Lava, M. Rossi, M. Badaloni, D. Debruyne, and F. PierronCombining digital image correlation and virtual fields to design an optimized experimental setup for material identification
      Photomechanics 2013, May 27-29, Montpellier, France
  • Y. Wang, P. Lava, P. Van Houtte, and D. DebruyneRandom error of measured strain field in DIC due to biased displacement measurement
      Photomechanics 2013, May 27-29, Montpellier, France
  • P. Lava, M. Juwet, S. Coppieters, and D. DebruyneFull-field strain measurements on packaging materials in biaxial tensile experiments
      26th Symposium on Packaging, June 10-13, Espoo, Finland
  • D. Shore, J. Gawad, S. Cooreman, P. Lava, D. Debruyne, D. Roose, J. Antonissen, and A. Van BaelSimulation of a thick plate forming benchmark using a multi scale texture evolution and anisotropic plasticity model
      SHEMET 2013, March 25-27, Belfast, Northern Ireland
  • B. Van Mieghem, P. Lava, D. Debruyne, A. Van Bael, and J. IvensDigital Image Correlation For On-Line Wall Thickness Measurements In Thick Gauge Thermoforming
      ESAFORM, April 22-24, Aveiro, Portugal
  • K. De Wilder, P. Lava, G. De Roeck, and L. VandewalleAnalysis of the structural behaviour of full-scale shear-critical prestressed concrete beams with digital image correlation
      SEMC 2013: THE FIFTH INTERNATIONAL CONFERENCE ON STRUCTURAL ENGINEERING, MECHANICS AND COMPUTATION, September 2-4, Cape Town, South Africa

2012

  • M. Rossi, F. Pierron, P. Lava, and D. DebruyneDevelopment of a Test Simulator to Perform Optimized Experiment Design
      Sem Annual 2012, June 11-14, Costa Mesa, USA
    [PDF]
  • S. Coppieters, P. Lava, H. Sol, P. Van Houtte and D. DebruyneMulti-axial quasi-static strength of a clinched sheet metal assembly
      Sem Annual 2012, June 11-14, Costa Mesa, USA
    [PDF]
  • P. Lava, W. Van Paepegem, S. Coppieters, I. De Baere and D. DebruyneImpact of lens distortions on strain measurements obtained with digital image correlation
      Sem Annual 2012, June 11-14, Costa Mesa, USA
    [PDF]
  • Y. Wang, P.Lava and D. DebruyneUncertainty Assessment of DIC Under Heterogeneous Strain States
      Sem Annual 2012, June 11-14, Costa Mesa, USA
    [PDF]

2011

  • De Baere, I., Van Paepegem W., Lava P., Debruyne D., Cofaru C., Philips W. and Degrieck J.Experimentally induced errors in Digital Image Correlation measurement of small strains with large gradients
      The 5th International Conference on Emerging Technologies in Non-Destructive Testing (ETNDT-5). 19-21 September 2011, Ioannina, Greece.
    [PDF]
  • Y. Wang, P.Lava, D. Debruyne and P. Van HoutteError estimation of DIC for heterogeneous strain states
      BSSM 2011, September 7-9, Edinburgh, UK
    [PDF]
  • P. Lava, S. Coppieters, Y. Wang, P. Van Houtte and D. DebruyneAssessment of measuring errors in strain fields obtained via DIC on planar sheet metal specimens with a non-perpendicular camera alignment
      BSSM 2011, September 7-9, Edinburgh, UK
    [PDF]
  • S. Coppieters, P. Lava, H. Sol, P. Van Houtte and D.DebruyneIdentification of post-necking hardening behaviour of sheet metal: a practical application to clinch forming
      Shemet 2011, April 18-20, Leuven, Belgium
    [PDF]
  • M. De Strycker, W. Van Paepegem, L. Schueremans and D.DebruyneThe effect of residual stresses on the strain evolution during welding of thin-walled tubes
      Shemet 2011, April 18-20, Leuven, Belgium
    [PDF]
  • M. De Strycker, P. Lava, W. Van Paepegem, L. Schueremans and D. DebruyneMeasuring thermal strains during the welding of tubes with DIC
      Photomechanics 2011, February 7-9, Brussels, Belgium
    [PDF]
  • S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte and D. DebruyneIdentification of post-necking hardening behaviour of sheet metal
      Photomechanics 2011, February 7-9, Brussels, Belgium
    [PDF]
  • P. Lava, Y. Wang and D. DebruyneMeasuring strain errors in DIC invoking heterogeneous deformation fields generated by plastic FEA
      Photomechanics 2011, February 7-9, Brussels, Belgium
    [PDF]

2010

  • S. Coppieters, P. Lava, H. Sol, P. Van Houtte and D. DebruyneDetermination of hardening behaviour and contact friction of sheet metal in a multi-layered upsetting test
      SEM 2010 Annual Conference on Experimental and Applied Mechanics, June 7-10, Indianapolis, Indiana, USA, 2010
    [PDF]
  • P. Lava, S. Cooreman, S. Coppieters and D. DebruyneSources of systematic errors in the determination of heterogeneous strain fields obtained via DIC
      SEM 2010 Annual Conference on Experimental and Applied Mechanics, June 7-10, Indianapolis, Indiana, USA, 2010
    [PDF]
  • M. De Strycker, W. Van Paepegem, L. Schueremans and D. DebruyneResidual stresses due to the welding of cold-rolled steel tubes
      ECRS8, June 26-28, Riva del Garda, Italy, 2010

2009

  • M. De Strycker, D. Debruyne, W. Van Paepegem and L. SchueremansWelding of Cold-rolled steel tubes: sensitivity of FEA input parameteres
      Complas X, September 2-4, Barcelona, Spain, 2009
  • S. Coppieters, S. Cooreman, R. Van Hecke, P. Lava and D. DebruyneInverse Identification of flow curves and interface friction for FE simulations of clinch forming
      SEM 2009 Annual Conference on Experimental and Applied Mechanics, June 1-4, Albuquerque, New Mexico, USA, 2009
  • P. Lava, S. Cooreman, S. Coppieters and D. DebruyneMeasuring errors in DIC invoking deformation fields generated by plastic finite element analysis
      SEM 2009 Annual Conference on Experimental and Applied Mechanics, June 1-4, Albuquerque, New Mexico, USA, 2009
    [PDF]
  • D. Debruyne, S. Cooreman, P. Lava and S. CoppietersIdentification of the plastic material behavior through inverse modelling and DIC: influence of the specimen’s geometry"
      SEM 2009 Annual Conference on Experimental and Applied Mechanics, June 1-4, Albuquerque, New Mexico, USA, 2009
  • P. Lava, S. Cooreman, S. Coppieters and D. DebruyneStudy of systematic errors in DIC using deformation fields imposed by finite element simulations"
      Optimess, May 25-26, Antwerpen, Belgium, 2009

2008

  • S. Cooreman, D. Lecompte, H. Sol, S. Coppieters, D. Debruyne, J. VantommeEstimating the Uncertainty Range on the Elasto-Plastic Material Parameters determined through Mixed Numerical-Experimental Techniques
      5th European Congress on computational methods in applied sciences and engineering ECCOMAS 2008, June 30 – July 4, Venice, Italy, 2008
  • D. Debruyne, S. Coppieters, S. Cooreman, M. De StryckerFinite Element Modelling of Clinched Connections
      5th European Congress on computational methods in applied sciences and engineering ECCOMAS 2008, June 30 – July 4, Venice, Italy, 2008
  • S. Cooreman, D. Lecompte, S. Coppieters, H. Sol, J. Vantomme, D. DebruyneDetermination of the elasto-plastic material behaviour by inverse modeling: influence of the specimen’s geometry
      International Symposium on Plasticity, January 3 – 8, Kona, Hawaii, 2008
  • S. Coppieters, S. Cooreman, K. Hertschap, H. Sol, D. DebruyneOptimization of clinched connections with the aid of finite elements techniques
      International Symposium on Plasticity, January 3 – 8, Kona, Hawaii, 2008
  • M. De Strycker, K. Vanden Hautte, D. Debruyne, W. Van PaepegemEffect of bending radius on plastic deformation in a combined cut-bent tube connection
      International Symposium on Plasticity, January 3 – 8, Kona, Hawaii, 2008

2007

  • M. De Strycker, K. Vanden Hautte, D. Debruyne, W. Van PaepegemLaser cutting of tubes: possibilities in lightweight structures
      Lightweight Structures in Civil Engineering – Contemporary Problems, December 7, Warsaw, Poland, 2007
  • D. Debruyneransient Thermal Analysis of Polymer Concrete Cells
      Abaqus users’ meeting, November 19-20, Hoeven, the Netherlands, 2007
  • M. De Strycker, K. Vanden Hautte, D. Debruyne, W. Van PaepegemDeveloping innovative tube connections with the aid of finite element analysis
      Abaqus users’ meeting, November 19-20, Hoeven, the Netherlands, 2007
  • M. De Strycker, K. Vanden Hautte, D. Debruyne, W. Van PaepegemSimulating the plastic bending of innovative tube connections
      IX International Conference on Computational Plasticity, September 5 -7, Barcelona, Spain, 2007
  • D. Lecompte, S. Cooreman, H. Sol, J. Vantomme, D. Van Hemelrijck and A.M. HabrakenPlastic material model identification using DIC on biaxial test
      Proceedings of the 13th ICEM Conference, July 1-6, Alexandroupolis, Greece, 2007
  • S. Bossuyt, S. Coppieters, D. Lecompte, H.Sol, J. VantommeComputer simulation and experiments to evaluate digital image correlation methods
      Proceedings of the 13th ICEM Conference, July 1-6, Alexandroupolis, Greece, 2007
  • S. Cooreman, D. Lecompte, H. Sol, D. Debruyne, S. CoppietersElasto-plastic material parameter identification by inverse methods
      Proceedings of the SEM Annual Conference and Exposition 2007, Springfield, Massachusetts, 3 - 6 June 2007
  • S. Coppieters, S. Cooreman, H. Sol, D. DebruyneReproducing the Experimental Strength of Clinched Connections With Finite Element Methods
      Proceedings of the SEM Annual Conference and Exposition 2007, Springfield, Massachusetts, 3 - 6 June 2007
  • D. Lecompte, S. Bossuyt, S. Cooreman, H. Sol, J. VantommeStudy and Generation of Optimal Speckle Patterns for DIC
      Proceedings of the SEM Annual Conference and Exposition 2007, Springfield, Massachusetts, 3 - 6 June 2007
  • D. Lecompte, S. Bossuyt, S. Cooreman, H. Sol, J. VantommeStudy of speckle patterns for DIC
      Proceedings of OPTIMESS 2007, Leuven, Belgium, 28 – 30 May 2007
  • S. Cooreman, S. CoppietersBasics of commercial available correlation measurement systems
      Proceedings of Tehnomus XIV, Suceava, Romania, 4-5 May 2007
  • S. Cooreman, D. Debruyne, S. Coppieters, B. Thienpondt, D. Lecompte, H. SolIdentification of the mechanical material parameters through inverse modeling
      Proceedings of Tehnomus XIV, Suceava, Romania, 4-5 May 2007
  • S. Cooreman, D. Debruyne, S. Coppieters, D. Lecompte, H. SolIdentification of the mechanical material parameters through inverse modeling
      4th International Conference on Emerging Technologies in NDT, Stuttgart, Germany, 2-4 april 2007

2006

  • J. Gu, S. Cooreman, A. Smits, S. Bossuyt, D. Lecompte, H. Sol, D. Van Hemelrijck and J. Vantomme Full field data collection for material identification with inverse methods
      Proceedings of the SEM annual conference and exposition, juni 2006
  • D. Debruyne, S. Cooreman, D. Lecompte, H. Sol and D. Van Hemelrijck Identification of the stress-strain behaviour of a tensile specimen after necking
      Proceedings of the SEM annual conference and exposition, juni 2006
  • D. Lecompte, S. Cooreman, H. Sol and J. Vantomme Identification of hardening behaviour for metals using inverse modeling and full field DIC
      Proceedings of the SEM annual conference and exposition, juni 2006
  • S. Cooreman, C. Bouffioux, D. Lecompte, H. Sol and J. Vantomme Elasto-plastic material parameter identification by inverse methods
      Proceedings of the SEM annual conference and exposition, juni 2006
  • J. Gu, S. Cooreman, A. Smits, S. Bossuyt, D. Lecompte, H. Sol, J. Vantomme and D. Van Hemelrijck Full field optical measurements used for material identification with inverse methods
      Proceedings of the 7th national congress on theoretical and applied mechanics, mei 2006
  • D. Lecompte, S. Cooreman, H. Sol and J. VantommeIdentification of flow stress parameters of metals using inverse modeling and full field DIC
      Proceedings of the 7th national congress on theoretical and applied mechanics, mei 2006
  • S. Cooreman, C. Bouffioux, D. Lecompte, H. Sol and J. VantommeComputation of the sensitivity matrix used for elasto-plastic material parameter identification by inverse methods
      Proceedings of the 7th national congress on theoretical and applied mechanics, mei 2006